Thermal Radiator Fan Switch 85deg
2,500.00 KShs
In stock
Fitting
Important: The switch must be installed in the low current side of a relay (i.e. one of the wires to pins 85/86 on a standard 4 or 5pin relay). If the current exceeds 1 Amp the switch is likely to fail and this is not covered under warranty. Using the switch directly in the wiring to a fan will cause the switch to fail.
For wiring we recommend running the fan directly from the battery via a relay and inline fuse, with the relay activated from a 12v + switched ignition source. You can also use a constant 12v source to activate the relay instead and this will allow the fans to continue running after the car is turned off until the coolant has reached the “off” temperature of the switch, as many modern cars do to aid with engine cooling after running.
The switch should be wired into the ground wire for the low current side of the relay. The maximum current rating of the switch is 1 Amp so fitting any fan inline with the switch will cause it to fail.
Buy it now
Brands:
SKU: SRU-TFS-85
Brand: SR